Timer Setting - H.Koenig KUBE KB15 Manuel D'utilisation

6. The ice maker automatically stops working when the ice basket is full and the "
will display in the LCD display widow.
7. Change water in the water reservoir every 24 hours to ensure a reasonable hygiene level.
If unit isn't in use, drain all water left in the tank.

TIMER SETTING

Timer Delay Time Range: 0.5-19.5 hours.
Default Delay Time: 3 hours.
When the unit is running, you can set the unit with OFF-TIMER to let the unit stop running after
your set delay time.
And when the unit is stopped, you can set the unit with ON-TIMER to let the unit start to run
automatically after your set delay time, then when you go back home or have a dinner, you can
enjoy the happy life that this ice-maker give to you.
How to set the timer
Press the TIMER button first, the default "3.0H" delay time will flash in LCD display window,
then press the SELECT button to select your desired delay time. Each press SELECT button
one time, the flashing delay time will increase 0.5 hour, and if you always press the SELECT
button for mor than 3 seconds, the delay time will chang very quickly. Then after 5 seconds
flashing, the delay time digit will change from flashing to always displaying, means the timer
program has been set.
How to cancel the timer
When the unit has been set with the timer or during the timer setting process, press the TIMER
button, then the delay time digit will disappear, mean the timer set has been cancelled.
CLOCK DISPLAY & THE CORRECT TIME
Clock
Time
through the CLOCK and SELECT button.
First press the CLOCK button once, the digit meaning hour will start to flash
first, then you can press SELECT button to change it, each press will increase
1 hour. Press the CLOCK button again, the digit meaning minute then will
start to flash, and also
time to confirm it, and now it display the new correct clock. And during adjusting process, after
5 seconds flashing, the digit will automaticall change to always displaing, also means the new
clock has been set.
CLEANING REMINDING
When the symbol flashs, means the unit need to be cleaned. And if you have cleaned the
unit, always press the TIMER button for more than 5 seconds, this symbol will disappear from
the LCD display window. And the cleaning timer will reset to Zero and reaccount again.
This unit is supplied with CLOCK dipalying function.
If the displayed time is not correct, you can adjust it to the correct digit
press the SELECT to change it. Then press the CLOCK the third
" symbol