H.Koenig KUBE KB15 Manuel D'utilisation page 3


CAUTION: Do not touch the evaporator when the product of the ice machine. It may burn
your skin.

CAUTION: Unplug the unit before to ensure maintenance, electrical shock.

In the case where the power supply of the device would be cut off unintentionally during the
ice production cycle or warning lights flash on the control panel and the machine produces
more ice, Turn off the power and unplug the device. Wait a few minutes and then gently
remove the cubes. Refer to the table at the end of the manual for troubleshooting.
WARNING: This appliance must be earthed.
IMPORTANT:
The wires in this mains lead are colored in accordance with the following code:
Green or Green with a strip yellow: Grounding
White:
Live
GETTING TO KNOW YOUR UNIT
To avoid a hazard due to instability of the appliance, it must be placed at a even or flat surface.
1. Cover:
2. Ice scoop.
3. Ice shovel.
4. Control Panel:
window.
1: Current Clock Time
2: No water diplay,When flashing, means no water in the unit, need to pour water in.
3. Ice-full display, when it display, means the ice basket is full of ice-cube.
4. ON/OFF display, if the unit has been turned off, this symbol will flash; And if the unit
is turned on, this symbol will always display.
5.Clean symbol: when this symbol flashs, means the unit need to be cleaned.
6.Ice-cube size displaying: Small, Medium, and Large.
7.Timer delay time display.
button: To start or stop the unit.
C. SELECT button: To select your desired size of the ice-cube: small, medium,large,
D. CLOCK button: To set the displayed time to the correct current time.
E. TIMER button: To set or cancel the timer program to let the unit start to run at your desired
5. Water drain cap: For draining water from water reservoir.
6. Air Outlet
7.Ice basket
Neutral
With a transparent window to allow interior visibility.
Easy to use, visible functions and LCD display setting. A. LCD display
three size of the ice-cube can be selected.
Or to change the time digit during the clock or timer setting program.
time or stop the unit at your desired because of forgetting.
Black:
B. ON/OFF