Using Bluetooth - KREAFUNK aTUNE Manuel D'utilisation

FM FUNCTION
Press SOURCE to go to FM mode. FM frequency will show on the display.
Auto tuning
Press and hold / to find the previous/next available station.
Manual tuning
Press / to fine-tune frequency (signal quality).

USING BLUETOOTH

You can connect your device via Bluetooth to stream audio to aTUNE.
Note: Please refer to your device manual for specific instructions on how to
connect with Bluetooth.
1. Press SOURCE to switch to Bluetooth mode.
The display will show Bluetooth and a flashing -icon, to show that aTUNE
is now in pairing mode.
2. Enable Bluetooth on your mobile device, and search for available
Bluetooth devices.
11
English