Aux Input; Using Bluetooth - KREAFUNK tRadio Manuel D'utilisation

Manual tuning
Under FM mode, short press
TUNE+/- to step up or down 50KHz.

AUX INPUT

1. Press DAB/FM/AUX button to
switch to AUX mode. Screen
will display Aux Input.
2. Connect AUX port to other audio
devices via the AUX cable
supplied to play music.
3. Adjust volume by either audio
devices themselves or volume
wheel.
4. To save power the unit will turn
off automatically after 10
minutes if no interactions via
AUX occurs.

USING BLUETOOTH

If your phone or tablet is capable
of storing audio files, you can use
Bluetooth to stream any music
stored on your phone or tablet to
the unit.
Note: Adding a Bluetooth device
varies on different mobile devices.
See your Bluetooth mobile device
manual for specific information.
1. Press Bluetooth button to
switch to Bluetooth mode.
Screen will display Bluetooth
and a flash dot, which means
the unit is standby to pair.
2. Enable Bluetooth on your
mobile device.
3. On your mobile device, select
English
11