Connection; Safety Instructions - KNAUS Calira Bord Control 2005 Mode D'emploi

Connection

Safety instructions

% ) "
'
Connecting the device to the power supply must comply with the
applicable national installation regulations.
The assembly and connection of electric devices should always be carried
out by qualified personnel!
Before any work on the device, ensure that the power supply is
disconnected! Pull out the mains plug!
When connecting the device, use only the supplied parts and the specified
cable cross-sections and fuses!
Only use suitable and undamaged tools.
Only connect the device according to the supplied connection diagram!
* ( ) '
Lerchenfeldstr. 9 87600 Kaufbeuren Phone: +49 (0)8341 9764-0 Fax: +49 (0)8341 67806
' ( '
(
+ ' "
31