Overload Protection; Maintenance And Service; Maintenance And Cleaning; After-Sales Service And Application Service - Bosch Xeo Notice Originale

OBJ_BUCH-377-009.book Page 22 Monday, December 11, 2017 11:03 AM
22 | English

Overload Protection

When the load on the machine is too high, the battery charge-control indicator 7
flashes red and the power tool switches off automatically.
– To start the operation of the machine again, relieve the load on the power tool first
and then switch on again (press ON/OFF switch 1).
The battery charge-control indicator lights up green again.
"Cut Control" Cutting-line Mark
The red line on the blade guard ("Cut Control" cutting-line mark 6) indicates the
cutting line of the blade 4.
This allows for precise guiding of the machine alongside the cutting line marked on
the material.
Cutting with the Cutting Adapter (Accessory) (see figures C1–C2)
The cutting adapter 12 enables you, as an example, to cut flooring alongside a wall.
After cutting, the flooring will have the optimal clearance of 3–5 mm to the wall
(expansion joint).
– Firstly, cut the flooring 5–8 cm above the desired edge.
– To fasten the cutting adapter 12 to the machine, insert the guide edge 5 to the
stop into the opening of the cutting adapter.
– Position the cutting adapter flush between wall and floor.
The imprinted arrow must face towards the floor ("
– Switch the machine on and guide the cutting adapter slowly alongside
the wall.
Note: Take care that the cutting adapter is always guided flush to the wall and the
floor, and that the flooring is always positioned firmly against the cutting adapter.
Otherwise, precise cutting to length is not possible.

Maintenance and Service

Maintenance and Cleaning

 Warning! Prior to any maintenance and cleaning, switch the machine off and
secure the lock-off button 2.
 For safe and proper working, always keep the machine clean.
While cutting, material residue can accumulate under the blade guard.
– Clean the blade guard 3 regularly using a brush or lightly moistened cloth.

After-sales Service and Application Service

Our after-sales service responds to your questions concerning maintenance and
repair of your product as well as spare parts. Exploded views and information on
spare parts can also be found under:
www.bosch-pt.com
Bosch's application service team will gladly answer questions concerning our
products and their accessories.
In all correspondence and spare parts orders, please always include the 10-digit
article number given on the nameplate of the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange the collection of a
product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
1 609 92A 48X | (11.12.17)
").
Floor
Bosch Power Tools