HyperX Cloud Headset Mode D'emploi page 8

Usage (with Control Box and Headset Splitter Cable)
If you are connecting the headset to a laptop or mobile device (phone or tablet) that has a
single audio jack, generally marked with an earphones or headset symbol :
Connect the control box to the headset splitter cable (letter J on page 4.) This will convert the
separate microphone and earphones jacks into a single 3.5mm audio jack as seen in Figure
1.8.
Figure 1.6 – Headset Splitter Cable
(Optional: The included extension cable (letter G on page 4) may also be used to add length to
the existing headset cable and control box.)
Figure 1.7 – Extension Cable (Optional)
Figure 1.8 – Using Headset Splitter Cable
Document No. 480KHX-H3CL/WR.A00 HyperX Cloud Headset Page 7 of 8