HyperX Cloud Headset Mode D'emploi page 7

Usage (with Control Box)
Connect your headset to the control box that has both a headset jack and a microphone jack
on it. The headset jack (green stripes) plugs into the green input port on the control box and
the microphone jack (pink stripes) plugs into the pink input port on the control box. The control
box cable then connects to your computer (or other output device w/ dual microphone and
headset jacks) using the 3.5mm audio jacks on the end of the cable.
(Optional: The included extension cable (letter G on page 4) may also be used to add length to
the existing headset cable and control box.)
Figure 1.4 – Extension Cable (Optional)
Figure 1.5 – Using Control Box
Document No. 480KHX-H3CL/WR.A00 HyperX Cloud Headset Page 6 of 8