Caring For And Cleaning The Vacuum Cleaner - Waeco PoverVac PV100 Notice D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 33
PowerVac PV100
➤ Lock battery in position with mounting (fig. 8 2, page 3).
➤ Close battery compartment (fig. 1 12, page 2)
➤ Charge new battery (see "Charging the battery" on page 25).
10
Caring for and cleaning the vacuum
cleaner
10.1
Cleaning the appliance and accessories
NOTICE!
A
Do not use sharp or hard objects or cleaning agents for cleaning as
these may damage the product.
➤ Occasionally clean the product with a damp cloth.
➤ Wash dirt canister and nozzles regularly with warm water and soap.
10.2
Clean filter
If filter is dirty, it may be cleaned and reused. If filter is extremely dirty, it may
be washed in water.
NOTICE!
A
Do not wash filter in washing machine or with hard objects, as this
may cause damage.
Proceed as follows to clean filter (see fig. 5, page 3):
➤ Detach clips on either side of casing (fig. 7 1, page 3).
➤ Lift casing away from dirt canister and twist.
➤ Remove filter (fig. 5 1, page 3) from bracket (fig. 5 2, page 3).
➤ Shake out dust and loose dirt.
➤ Clean filter under tap if necessary.
NOTE
I
Allow the filter to dry before you replace it in the bracket.
EN

Caring for and cleaning the vacuum cleaner

29

Publicité

Table des Matières
loading

Table des Matières