Memphis AJ140-S Manuel D'utilisation page 14

USING THE TIMER BUTTON (13) ON CONTROL PANEL TO SETUP
THE WEEK TIMER
Press and hold the timer button (13) on control panel for 5 seconds
to input current local time(01,02,03, ...21,22,23) by pressing flame
button (11) or thermostat control button (12), then press timer button
(13) again to confirm previous setup and the digital display will show
"1d" to start setup 1st group and re-press the timer button (13) once
and right after the digital display showing "--" to setup the UNIT-ON-
TIMER by pressing flame button (11) or thermostat control button (12)
and press timer button (13) again and after digital display showing "--"
to setup UNIT-OFF-TIMER by pressing flame button (11) or thermostat
control button (12), then press the timer button(13) once to confirm
the previous settings and after the digital display showing "--" to setup
the temperature desired; and repeat to setup 2d,3d, .. ,7d; to skip a
specified day/group, by continue pressing timer button(13) to select
and setup the timer function o the specified date desired.
USING THE REMOTE CONTROL TO SETUP THE WEEK TIMER
Press the week timer button (14) 1st time to activate the function
and setup the current local time by pressing week timer adjustment
buttons (15) "+"/"-" and re-press the week timer button (14) and
display (B) will show"1d", and press again the week timer button (14)
to enter the adjustment mode and the digital display showing "--", then
press the week timer adjustment buttons (15) "+"/"-" to setup the time
to turn on and turn off the unit, and press the week button (14) 4th
times to setup the temperature.
Repeat the actions above to setup the time and temperature for other
groups and different days.
Maintenance and cleaning
WARNING! DANGER OF DEATH BY
ELECTRIC SHOCK!
Before conducting cleaning or maintenance
work please unplug [3] the unit and let it completely
cool down.
14