Vacuum-Cleaning - SEVERIN 7144 Mode D'emploi

HV7144.book Seite 19 Freitag, 19. Mai 2017 10:47 10

Vacuum-cleaning

Vacuum-cleaning surfaces
4 Vacuum-cleaning
1. Fit the crevice nozzle as necessary.
2. Fit the furniture brush as necessary.
3. Push the On/Off button to the "I" position to switch on the appliance.
- The LED lights up green. The appliance is switched on.
4. Vacuum-cleaning the surface.
5. Push the On/Off button to the "0" position to switch off the appliance.
TIP: The LED on the handle starts flashing green when the battery charge is running low. The
vacuum cleaner switches off automatically when the battery charge is too low. Charge the
rechargeable battery, chapter „Connecting and charging the rechargeable battery".
Picking up liquids
1. Insert the rubber nozzle into the suction opening.
2. Push the On/Off button to the "I" position to switch on the appliance.
- The LED lights up green. The appliance is switched on.
3. Pick up the liquid.
4. Push the On/Off button to the "0" position to switch off the appliance.
5. Empty the dust bin, chapter „Cleaning the dust bin and filter".
TIP: The LED on the handle starts flashing green when the battery power is running low. The
vacuum cleaner switches off automatically when the battery charge is too low. Charge the
rechargeable battery, chapter „Connecting and charging the rechargeable battery".
19