Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
ENERGY MOVIER: INSTALLATION
≥
With Energy Movier software tool you can easily convert your AVI/WMV/MPG/
VOB/ASF videos to the AVI format (XVID with MP2 audio and) so you can enjoy
them with your MP4 Energy™.
To install Energy Movier follow these steps:
1.
Insert the bundled drivers CD into your CD reader drive.
Note: The latest available version of the software is saved in the dirvers CD
when the unit leaves the factory. However, if you have an internet connection,
we recommend you to always download the latest version from our website www.
energysistem.com/videosweb.
2.
Once you see the Energy Sistem menu, select "Install Energy Movier". If you have
autorun disabled, you can run the installation file "setup.exe" from the folder
"SOFTWARE/Energy Movier".
3.
On the installation screen, select "OK" and click on the icon to begin the
installation. Follow the steps by pressing "Continue".
Note: Depending on the codecs you have installed in your computer, you might
get a message of the program trying to overwrite some of them. In that case, we
recommend that you keep your existing files by pressing "Yes".
4.
Once the installation is complete, you can run the application from Start -> "All
programs" -> "Energy Sistem" -> "Energy Movier".
57
Publicité
Table des Matières
