Manual Operation; Microwave Cooking - Sharp R-360 Mode D'emploi

Table des Matières

Les langues disponibles

Opening the door:

To open the oven door, pull the door handle.

Starting the oven:

Depending on the food type and the required end results, either place food into a suitable

container, then place the container onto the plate, alternatively place foods directly onto

the plate. Close the door and press the START/QUICK START key after selecting the desired

cooking mode.

Once the cooking programme has been set if the START/QUICK START key is not pressed in

20 seconds , the setting will be cancelled.

The START/QUICK START key must be pressed to continue cooking if the door is opened

during cooking. An audible signal will sound once when pressing the button, if inefficiently

pressed there will be no sound.

Use the STOP/CLEAR key to:

1. Erase a mistake during programming.

2. Stop the oven temporarily during cooking.

3. Cancel a programme during cooking, press the STOP/CLEAR key twice.

4. To set and to cancel the child lock (refer to page GB-19).

Your oven can be programmed for up to 99 minutes 50 seconds (99:50).

The input unit of cooking (defrosting) time varies

from 10 seconds to 10 minutes.

It depends on the total length of the cooking (de-

frosting) time as shown on the table.

MANUAL COOKING/MANUAL DEFROSTING

• Enter the cooking time and use the microwave power levels P100 to P20 to cook or de-

frost (refer to page GB-17).

• Stir or turn the food, where possible, 2 - 3 times during cooking.

• After cooking, cover the food and leave to stand, where recommended.

• After defrosting, cover the food in foil and leave to stand until thoroughly defrosted.

Example:

To cook for 2 minutes and 30 seconds on P80 (80%) microwave power.

1. Press the MICRO

POWER key. P100

will be displayed.

User_manual_R360_WEST.indb 18