About The Audio Connection; About The Video Converter - Pioneer SC-LX 85 Guide Rapide

Connecting your equipment
02
[J] 5.2 channel surround system & Front and Center Bi-amping
connection (High quality surround)
SC-LX85 only
! Select '5.1ch F+C Bi-Amp' from the Speaker System menu.
See Speaker system setting on Operating Instructions in CD-ROM to do this.
Bi-amp compatible speaker Bi-amp compatible speaker
Front right
Subwoofer 1
High
LINE LEVEL
INPUT
Low
IN 4 IN 5
IN 1 IN 2
(VIDEO) (DVD)
BD IN
HDMI
ASSIGNABLE
1 6
COMPONENT VIDEO
ASSIGNABLE
Y P P
B R
IN
1
(DVD)
IN 2
(DVR/
BDR) ZONE 2 ZONE 3 DVD TV/SAT VIDEO DVR/BDR
OUT OUT IN IN IN OUT
IN
3
(VIDEO)
MONITOR
OUT
ZONE2
OUT
A
FRONT
RS-232C R
SPEAKERS
AM LOOP FM UNBAL 75
ANTENNA
IR
IN 1
IN 1
OUT
CU-RF100
IN 2
OUT
2
(OUTPUT 12 V
(OUTPUT 5 V
TOTAL 150 mA MAX)
150 mA MAX) CONTROL 12 V TRIGGER
Surround right
18
En
Bi-amp compatible speaker
Center Front left
Subwoofer 2
High High
LINE LEVEL
INPUT
Low Low
IN 6 ADAPTER PORT
OUT 1 DC OUTPUT
(DVR/BDR)
(OUTPUT 5 V
(CONTROL) OUT 2 for WIRELESS LAN LAN
AC IN
(OUTPUT 0.1 A MAX)
(10/100)
5 V
0.6 A MAX)
VIDEO COAXIAL OPTICAL
ASSIGNABLE ASSIGNABLE
SIGNAL IN 1 IN 2 IN 1 IN 2 IN 3 OUT
MONITOR
OUT GND ( DVD ) ( CD ) ( TV/SAT ) DVR/BDR ( ) ( VIDEO )
PHONO
IN IN CD IN FRONT SUBWOOFER SURROUND SURR BACK F HEIGHT F WIDE FRONT CENTER SURROUND SURR BACK
1 2
(Single)
L
R
AUDIO PRE OUT MULTI CH IN
CENTER SUBWOOFER
B
CENTER FRONT HEIGHT FRONT WIDE / SURROUND SURROUND BACK
L R L R L R L R

About the audio connection

Types of cables and
terminals
HDMI
Digital (Coaxial)
Digital (Optical)
RCA (Analog)
(White/Red)
! With an HDMI cable, video and audio signals
can be transferred in high quality over a single
A
L
(Single) cable.

About the video converter

The video converter ensures that all video
sources are output through all of the MONITOR
VIDEO OUT jacks. The only exception is HDMI:
since this resolution cannot be downsampled,
you must connect your monitor/TV to the
receiver's HDMI output when connecting this
Surround left
video source.
If several video components are assigned to the
same input function (see The Input Setup menu
on Operating Instructions in CD-ROM), the
converter gives priority to HDMI, component,
then composite (in that order).
Terminal for connection with
source device
Transferable audio HDMI IN
signals
HD audio
Y P P
B
COMPONENT
VIDEO IN
Conventional digital audio
VIDEO IN
Video signals can be output
Note
! If the video signal does not appear on your
Conventional analog audio
TV, try adjusting the resolution settings on
your component or display. Note that some
components (such as video game units) have
resolutions that may not be converted. In this
case, try switching Digital Video Conversion
(in Setting the Video options on Operating
Instructions in CD-ROM) OFF.
! The signal input resolutions that can be
converted from the component video input
for the HDMI output are 480i/576i, 480p/576p,
720p and 1080i. 1080p signals cannot be
converted.
! Only signals with an input resolution
of 480i/576i can be converted from the
component video input for the composite
MONITOR OUT terminals.
! For optimal video performance, THX
recommends switching Digital Video
Conversion (in Setting the Video options on
Operating Instructions in CD-ROM) OFF.
This item incorporates copy protection technol-
ogy that is protected by U.S. patents and other
intellectual property rights of Rovi Corporation.
Reverse engineering and disassembly are
prohibited.
Terminal for connection
with TV monitor
HDMI OUT
Y P P
R B R
COMPONENT VIDEO
MONITOR OUT
VIDEO
MONITOR OUT