Selecting Your Program - Sonetik GOhear Mode D'emploi

Selecting Your Program

Refer to the owner information page to find the base
program for your right and left GOhear hearing aids.
Your GOhear hearing aid resets to program 1 whenever the
hearing aid is turned off and back on.
To change the program, press and hold the push-button
until you hear the beep. The push-button is located on the
top of the hearing aid.
•
Press the push-button once to select program 2
(you will hear 2 beeps).
•
Press the push-button again to select program 3
(you will hear 3 beeps).
•
Press the push-button again to select program 4
(you will hear 4 beeps).
•
Press the push-button again to go back to program 1
(you will hear 1 beep).
You may find that certain programs are more comfortable
in different situations. For instance program 1, which has
less amplification, might be more comfortable in noisy
environments such as restaurants. On the other hand,
program 4, which has more amplification, might be more
comfortable when listening to a speaker in an auditorium.
9