Maintenance; Cleaning And Maintenance Of The Unit - Titan MAX Notice D'instructions

8.

Maintenance

8.1. Cleaning and maintenance of the unit

Insertion slot.
Hollow spaces of the sealing pincers.
Transport wheel.
Guide screw
Then oil it with a commercial spray oil.
Maintenance unit!
daily check of the compressed air
daily check of the oil level
draining the water separator
cleaning the filter according to instructions
Tool inspection!
Perform a daily visual inspection of the outside of the unit. The early detection
of damaged parts extends the life of the unit. Replace all damaged parts with
new parts.
MAX
Dirt and abrasion impair the function of the unit.
Therefore clean the following areas every week.
If possible, perform air-cleaning (wear protective glasses).
Do not use any solvent containing cleaning agents for
H 265 EU 27/11
reasons of health.
31 / 56