Titan MAX Notice D'instructions page 29

Tensioning
Press the right switch-on key with the thumb
of your right hand. The key is caught, until
the tensioning is finished. The staff can
interrupt the tensioning by pressing the red
key on the right side.
Sealing
Use the thumb of your right hand to press
the left switch-on key until the sleeve is
closed and the band is cut.
The unit then releases the seal. Hold the
end of band cut with your left hand and
press the lifting lever and the compressed
air motor.
To be sure that the unit formed a clean seal,
check the strapping thoroughly.
The following picture shows a correctly carved seal.
Check the seals regular:
for crackings on the sleeve
and
for neat cutting edges.
MAX
H 265 EU 27/11
29 / 56