Fora IR21 Manuel De L'utilisateur page 13

for FORA IR21c / IR20c and FORA IR21b / IR20b,
respectively. Accessories needed to activate this
function are:
Health Care Software System: a software downloaded
from ForaCare's website (www.foracare.ch)
Interface Cable: an optional accessory for FORA
IR21c / IR20c.
Bluetooth Adapter: an optional accessory for FORA
IR21b / IR20b.
Please contact your local customer service for above
accessories.
Transmitting data via Cable
(FORA IR21c / IR20c)
Step 1 Install Software
Install Health Care System Software on your computer
by following the instructions provides on ForaCare's
website.
Step 2 Connect to Personal Computer
Connect the interface cable to a serial port on the back
of your computer. With the thermometer turn off, connect
the interface cable to the data port located at the bottom of
the thermometer. Then " PCL " will appear in the display,
indicating that the thermometer is ready to transmit data.
Step 3 Transmit Data
Follow the instructions provided in the software to
transmit data. Results transmitted will include date
and time. Remove the cable and the thermometer will
automatically turn off.
Transmitting data via Bluetooth
Adapter (FORA IR21b / IR20b)
Step 1
Install Health Care System Software on your computer
by following the instructions provided on ForaCare's
website.
Step 2
Install Bluetooth Adapter Software.
Step 3
Reset FORA IR21b / IR20b thermometer.
Step 4
EN-11