Taking Ear Temperature (IR20)
Step 1
Make sure probe cover is firmly
attached to the probe.
Step 2
Press and release the On / Memory
button to turn on the thermometer.
When ready, the thermometer
displays the last measurement.
Step 3
Stretch your ear canal by pulling
your ear backwards and upwards
and carefully insert the thermometer
into the ear.
Step 4
Press and release the Scan button.
Do not remove the thermometer
until it beeps.
Step 5
Read the result.
"
" is shown together with a
temperature value.
Step 6
Discard used probe cover into trash
by pressing probe cover ejection
button.
NOTE
Turn off the thermometer by pressing On / Memory button twice.
It will automatically turn off if left idle for 3 minutes.
EN-8