Recalling The Memory; Viewing Results On A Personal Computer - Fora IR21 Manuel De L'utilisateur

Recalling the Memory

Your thermometer stores 10 recent readings in the
memory.
Step 1
Be sure the
thermometer is OFF
before recalling this
memory.
Step 2
Press the On /
Memory button
to turn on the
thermometer.
Step 3
Press the On /
Memory button for
3 seconds to enter
memory mode.
Each time you press the On / Memory button, a result will
be displayed in the order of dates (latest result shown
first), together with "
When the memory is full, the oldest result is deleted as
the new one added. When the last record is displayed in
the LCD, press On / Memory button again to return the
first record.
Step 4
Exit the memory.
Press the Scan button and LCD will show latest results
with flashing "
" . Then press On/Memory button
again and LCD will show " OFF " to exit memory.
NOTE
When using the thermometer for the first time, the first memory
result will display 0.0°C. It indicates that there are no test results
in memory.
Viewing Results on a
Personal Computer
Results in memory can be transmitted to the personal
computer by either cable or wireless connection
EN-10
" and number ( from 1 to 10 ).