Broan ROOMSIDE Série Instructions D'installation, D'utilisation Et D'entretien page 5

9. Install blower.
Re-install blower. Secure blower with (2) screws from parts bag and
plug blower into black receptacle.
10. Finish ceiling, then install grille.
Attach MOUNTING PLATE to housing with (2) SCREWS, using
the GRILLE BACKETS installed in step 4.
Connect LIGHT PANEL PLUG to receptacle in corner of
housing.
Line up (3) STUDS on GRILLE FRAME with (3) KEYHOLE
SLOTS on MOUNTING PLATE. Rotate GRILLE FRAME to
secure in place.
KEYHOLE
SLOT (3)
LIGHT PANEL
PLUG
GRILLE
FRAME
RETROFIT
5. Remove old fan.
Enlarge ceiling opening (if necessary)
to 9¾" (parallel to joist) by 10½"
(perpendicular to joist). Leave ductwork
and wiring in place.
9¾-in.
6. Fold mounting ears flat
MOUNTING
PLATE
MOUNTING
PLATE
ATTACHMENT
SCREW (2)
STUD (3)
1
10½-in.
against housing.
JOIST
2
5