System Settings - RC Logger 89050RC Instructions D'utilisation

14. sysTem seTTIngs

This chapter describes the "System" settings in more detail.
Note the following header prefixes for easier navigation:
- Sub-1 : Parent menu
- Sub-2 : Child of parent menu
> Slide the video switch
> Observe the chapter "Menu navigation" on page 14.
sub-1 date Time
> Set the date and time
sub-1 language
> Choose your desired language
sub-1 av out
> Choose the video output source:
- LCD (this monitor)
- NTSC (display device supporting NTSC signal)
- PAL (display device supporting PAL signal)
> Read chapter "Connecting to a TV or headphone set"
on page 24 for more information on connecting to an
external display device.
18
into position or .
sub-1 format
> Format the microSD card. All stored data is lost!
sub-1 Power save
Power save settings extend the battery life.
sub-2 auto lCd off
This setting turns the display off after the specified time.
> Select a given time to activate the function.
> Select "Off" to deactivate the function.
> During display sleep, wake the monitor by pressing any
button.
sub-2 auto Power off
This setting turns the monitor (the device) off after the specified
time.
> Select a given time to activate the function.
> Select "Off" to deactivate the function.