Avintage AV7XK Notice D'utilisation page 44

CAUTION: do not overtighten the screws.
Reversing the door
The door can be changed from left and right side. No special requirement, all the door is opened from
left side. If required to open from right side please refer to the following direction.
1. Remove the ventilation grille ○ ,2 and the adjustable ventilation grille ○ ,1 by unscrewing the screws
○ ,3 & ○ ,4. (Fig. 1)
2. Remove the bottom hinge ○ ,5 by unscrewing the four lock screws ○ ,6. Be careful to hold the glass
door firmly after removing the screws. (Fig. 2)
3. Gently pull down to remove the glass door from the right top hinge and place it on a padded
surface to avoid the risk of damage. Then remove the right top hinge ○ ,9. (Fig. 4)
4. Unscrew and transfer hinge pin ○ ,7 and/or door stopper ○ ,8of the bottom hinge to the opposite
side. (Fig. 3)
5. Pop out the cover caps on the left side of cabinet and use them to
right hand side.
6. Screw the alternative left top hinge ○ ,11, included in the fittings,
(Fig. 4)
7. Unscrew and transfer the holes cover ○ ,12 and lock catch ○ ,13 to the opposite side of glass door.
(Only for models with lock on the ventilation grille) (Fig. 5)
8. Rotate the door 180° (No need for models with lock on the door) and relocate the door to the
designated position. Then screw the bottom hinge assembly on the left designated position and
tighten it after the door is leveled.
9. Transfer the handles & plugs to the opposite positions and then reassembly the ventilation grilles if
need.
4. OPERATING INSTRUCTIONS
It is recommended that you installed your appliance in a place where the ambient temperature is
between 16-32°C/16-38°C (depending on the model). If the ambient temperature is above or below
recommended temperatures, the performance of the unit may be affected and it may not be possible
to obtain temperature between 5-22°C.
cover the screw holes on the
on the left hand side of cabinet.
44