Installation Instructions - Avintage AV7XK Notice D'utilisation

Once the appliance is installed and loaded, access to it is not so easy.
CAUTION: no assistance can be provided without this information.

3. INSTALLATION INSTRUCTIONS

Before using this appliance
 Remove the exterior and interior packing.
 Before connecting the appliance to the power source, let it stand upright for approximately 24
hours. This will reduce the possibility of a malfunction in the cooling system from handling during
transportation.
 Clean the interior surface with lukewarm water using a soft cloth.
 The door on this appliance can be opened from either the left or the right side and the maximum
angle of opening of the door is 100°.
 When disposing your appliance, please choose an authorized disposal site.
 Place your wine cooler on a position that is strong enough to support it when it is fully loaded. To
level your wine cooler, adjust the front leveling leg at the bottom of the wine cooler.
 This appliance must be fixed at the top and the bottom using the rail provided for the purpose in
order to avoid any risk of tipping when the shelves are slid out.
 Adequate ventilation is required, do not block the front air outlet.
 The appliance is for indoor use only.
 This wine cellar is designed for built-under installation.
 Connect the cellar to a single socket and be careful to support it, so that your wine cellar is
perfectly level (use of a spirit level is recommended). This will prevent any movement due to
instability, causing noise and vibration, and will ensure that the door seals perfectly.
 This appliance is intended to be used exclusively for the storage of wine.
 This appliance is using flammability refrigerant. So never damage the cooling pipe work during the
transportation.
Attention
 Store wine in sealed bottles.
 Do not overload the cabinet.
 Do not open the door unless necessary.
 Do not cover shelves with aluminum foil or any other shelf material which may prevent air
circulation.
 Should the wine cooler be left empty for long periods it is suggested that the appliance is
unplugged, and after careful cleaning, leave the door ajar to allow air to circulate inside the cabinet
in order to avoid possible condensation, mold or odors forming.
CAUTION: please keep the appliance away from substance, which can cause ignition.
41