Settings; Call Settings; Phone Settings; Display - MPMan PH100 Mode D'emploi

MPMAN

11. Settings

11.1. call settings

Dual SIM: You can set your phone network status, including Standby mode, Reply by original SIM, Set SIM name.

Call divert: Divert an incoming call to a designated phone number under the presetting condition. This function can be launched or closed.

Call waiting: The network will inform you for a newly incoming call during the call. Please contact with your network operator to launch or close the

function because the function requires the network support.
Call barring: Set up the right of calling and answering. This function requires the network support. You can launch or close the function.

Hide ID: Default status is Display ID by network.

Others: The settings item include Call time minute reminder, Auto redial, Reply SMS after reject and Auto call record.


11.2. Phone settings

Time & Date: You can set time, date and format for your phone.

Language settings：Set the current system language.

Shortcut settings: You can set the direction key designated menu.

Auto power on/off：Phone can power on/off according to your preset time.

Restore factory settings: You can recover the phone into the initial settings with this function. The default password is: 1234.


11.3. Display

Animation effect: Set the power On or Off animations.

Wallpaper settings: Set an image as wallpaper.

Idle display settings: On, it will be displayed in the standby interface.

Contrast：Adjust the displaying contrast.

Keypad backlight time: Set the duration for keypad backlight.

Auto keypad lock: Set to lock the keypad. You have 5 secs, 15 secs, 30 secs, 1 min and 5 mins options.


11.4. Security

The phone lock password, SIM card password and PIN2 support 4-8digit numbers, do not support other characters. The default password of the phone when
leaving the factory is 1234.
The PUK /PUK2 are required to input if you want to unlock the SIM card. The PUK/PUK2 is provided by the network operator.
PIN lock: open or close the PIN lock function. When PIN lock is launched, the PIN shall be input upon each power-on.

Modify PIN2: Input the correct PIN 2. Just can be change.( The SIM2 security setup is same to the SIM1 security setup.)

Phone locked: Open or close the phone lock function. When the phone lock is launched, the phone lock password shall be input upon each power-on.

10
PH100