Cleaning And Maintenance; Ce-Statement - EUROM SHOEDRYER 2.0 Manuel D'utilisation

Timer:
The heater is equipped with a timer. When you wish to use that, do not turn the ON/OFF button to ON,
but from the OFF position clockwise to the required number of minutes of operation (max. 120). The
heater will now switch
on and the indicator light will be illuminated. Once the set time has ended, the heater will
automatically switch off (the light be no longer be illuminated).
Even when actual operation has ended, the timer will sometimes emit a gentle ticking sound. That is
not dangerous and it will stop of its own accord.
Please note!
The ON/OFF button may therefore
be turned anticlockwise from '0' to ON
-
be turned clockwise from ON to '0'
-
be turned clockwise from '0' to a maximum of 120 (minutes)
-
But never turn it anticlockwise from ON to 120 or clockwise from 120 to ON!
After using the button, always turn it to '0' and remove the plug from the socket.
Overheating safeguard
In case of internal overheating, the overheating safeguard will switch the heater off. This may occur if
the heater cannot give off enough heat or if it cannot draw in enough fresh air. As mentioned above,
this is generally caused by (partially) covering the heater, obstructing the air intake and/or outlet grills
or installing the heater too close to a wall or something similar. When the overheating safeguard
switches the heater off, set the mode selector dial to '0' (off), unplug and allow the heater to cool
down. Remove and/or amend the cause of overheating and reuse the heater as normal. If you cannot
find a cause and overheating recurs, stop using the heater, and take it in for inspection/repair.

Cleaning and Maintenance

Keep the heater clean. Deposits of dust and dirt in the appliance are a common cause of overheating
so these should be removed regularly. Switch off the heater, remove the plug from the socket and
allow the heater to cool down before cleaning or carrying out maintenance work.

Wipe the outside of the heater regularly with a dry or slightly damp cloth. Do not use aggressive
soaps, sprays, cleaners or abrasives, waxes, polishes or chemical solutions!

Using a vacuum cleaner, carefully remove any dust and dirt from the grills and ensure that the air
intake and outlet openings are clean. Be careful not to touch or damage any internal parts during
cleaning!

The heater contains no other parts which need maintenance.

At the end of the season, store the cleaned heater in the original packaging if possible. Store
upright in a cool, dry and dust-free place.

Do not dispose of heater with household waste when if becomes worn or damaged beyond
repair. Take it to your local authority's collection point for electrical appliances where any reusable
materials will be collected and redistributed.

CE-statement

Euromac bv, Genemuiden-NL hereby declares that the EUROM Shoedryer, type Shoedryer 2.0,
complies with the LVD guideline 2006/95/EG and the EMC guideline 2004/108/EC, and that it meets
the following standards:
EN 60335-1:2012
EN 60335-2-43:2003+A1:06+A2:08
EN 62233:2008
Genemuiden, 27-05-2014
W.J. Bakker, alg.dir.
EN 55014-1 :2006/+A1 :2009/+A2 :2011
EN 55014-2 :1997/+A1:2001/+A2:2008
EN 61000-3-2 :2006/+A1:2009/+A2:2009
EN 61000-3-3:2008
12