Remote Control - Magnat MCD 750 Mode D'emploi

REMOTE CONTROL

AMP CD
/ Disconnect
1 2 3
PROGRAM
4 5 6
RANDOM
7 8 9 0
DISPLAY REPEAT
/
AUTO INFO
SOURCE TUNING VOL.
1 2 3
4 5 6
7 8 9
+
0 10
• Before using the remote control the supplied
batteries must be inserted into the battery
compartment located at the rear of the
remote control.
• If the batteries have run out after prolonged
use, please replace them (type AAA).
• To prevent causing damage to the remote
control please remove the batteries if the
device is not going to be used for a prolonged
period.
1 CD
Switches the device on when it is in the standby
mode. If the LED does not illuminate, actuate
the power switch located on the rear of the
device. Conversely the device can be switched
from power operation to the standby mode.
2 NUMERICAL BUTTONS
Direct selection of a track.
3 DISPLAY
Display of the CD text or ID3 tag (if supported by
the CD):
The 2nd line of the display shows the entire CD
text/ID3 tag information. Pressing this button
displays the individual items of information in
the following order:
Title – performer – album – no display
For MP3 and WMA files, the file name and
data rate of the current title are displayed
additionally.
4 Search/Skip
Brief press: Playback starts at the beginning of
the current track.
Two brief presses: Playback starts at the
beginning of the previous track.
Press and hold: High-speed rewind. Remains
active as long as the button is depressed.
5 Search/Skip
Brief press: Playback starts at the beginning of
the next track
Press and hold: Fast forward. Remains active
as long as the button is depressed.
6 STOP
Stops a CD that is playing.
7 PLAY/PAUSE
Starts or pauses the playback from a CD.
8 EJECT
Opens the CD compartment.
9 REPEAT
Track/CD repeat playback (repeat function):
• Press once: The current track is repeated.
The following appears in the display:
REPEAT ONE
• Press twice: The entire CD is repeated.
The following appears in the display:
REPEAT ALL
• Press again: The repeat function is
deactivated. The following appears in the
display:
REPEAT OFF
10 RANDOM
Plays the titles of a CD in random order.
• Press once: The function is deactivated.
The following appears in the display:
RANdOM-ON
• Press again: The function is activated.
The following appears in the display:
RANdOM-OFF
11 PROGRAM
Programming tracks on a CD in a particular
order.
The Stop mode must be activated to programme
tracks.
• Press the PROG button.
Display: PRG 01-00
12
• Now assign the desired track to memory
location 01 by selecting the track number via
the numeric keypad or the SKIP button.
Display e.g.: PRG 01-08
• Press the PROG button again.
Display:
PRG 02-00
• Now enter the desired track for memory
location 02.
• Repeat these steps until all of the desired
tracks have been programmed. After the last
title, press the STOP button. The number of
programmed titles and the total playing time
of the programme list are displayed.
• Start playing the programmed list by pressing
PLAY. A "P" appears to the left of the display,
followed by the current track and elapsed
time.
Display e.g.:
P 08-00: 0 7
• You can manipulate playback within the
programmed list by pressing SKIP, SEARCH
and PAUSE/PLAY.
• The programme is erased after pressing the
STOP or EJECT button.
The non-numbered buttons are reserved for
operating the Magnat MR 780 and have no
function for the MCD 750.