Warm Tech RHPM1203-48 Traduction Des Instructions D'origine page 12

9. Do not use the appliance near liquids or inflammable matters. Do not locate the heater below a
socket outlet. If the heater is covered or placed improperly, it can't be used together with
programming controller, timer or other equipment with autocontrol on and off, otherwise it will cause
the danger of fire.
10. Do not cover the appliance when it is running to avoid overheating risks. If the power cable is
damaged, it must be maintained or changed my manufacturer or professional to avoid any
dangers.
11. This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a person
responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
12. Do not connect the appliance to extension cords or multiple outlets.
Do not damage and do not kink the power cord. Before cleaning the appliance or carrying out any
maintenance switch off the whole system.
13. If the heater is without working, do not turn it by hand as the
oscillation setting is fixed.
14. If the appliance is out of work, switch it off without tampering it .If any repair is required please
contact only the after–sale centers approved by the manufacturer and ask for original spare parts.
Otherwise safety of the appliance can be compromised.
ASSEMBLY
1. Assemble the body frame and the base plate together as the following
sequences. Remove the mounting screw from the lower part of the
body frame.
2. Insert the power cord through the slot placed in the middle part of the
basement and then assemble the body frame to the base plate.
3. Secure the body frame to the base plate by means of the two
mounting screw previously removed. Insert the power cord through the suitable slots and then fix it
by the clamp.
12