König Electronic KN-WS500 Mode D'emploi page 2

Part I
This weather station has 7 different language options: English German, French, Italian, Spanish, Dutch
and Danish.
The weather station has 6 different buttons: CH ALERT MAX/MIN C/F 12/24 SNOOZE/LIGHT. These
buttons are used for the following functions:
1. The CH button is used to select channel 1, 2 or 3 while receiving the signal from the transmitter.
Please note that the selected channel must comply with the selected channel on the transmitter.
For example: if the transmitter is set to channel 1, the weather station needs to be set to channel 1
as well.
2. ALERT Button
* While in normal display mode, press this button to activate or deactivate the temperature alert
function. An arrow icon will appear to indicate the function has been activated, or the arrow icon will
disappear to indicate the alarm is deactivated.
* While in normal display mode, press and hold this button for 3 seconds to enter the temperature
alert settings. The indoor temperature digits will start flashing; press the DOWN button at the rear
to set the temperature (0° - 50°) at which the station has to sound an alarm.
3. MAX/MIN Button
* Press this button to display the maximum temperature and humidity of both indoors and outdoors.
* Press again to display the minimum temperature and humidity of both indoors and outdoors.
4. Set Alarm
* Press ALARM button at the back to display the alarm time.
* To set the alarm time, press ALARM time once, the alarm time displays, hold the button for
3 seconds, alarm HOUR digit flashes, use UP or DOWN to set the alarm hour.
* Press the ALARM button again, the alarm MINUTE digit flashes, use UP or DOWN to set the alarm
minutes.
5. Activate / Deactivate the Alarm Function
Under Alarm Mode , press "ALARM" button at the rear to activate or deactivate the alarm function.
Alarm bell sign will appear or disappear accordingly
6. C/F Button
Press the C/F button to switch the temperature display between C/F. Press and hold button for
3 seconds to force the unit to enter the RCC reception.
7. 12/24 Hr Button
Press 12/24-hour button to toggle between 12/24-hour formats.
8. Use Snooze
When alarm activates, press SNOOZE to stop the alarm sound, alarm will sound again after 5 minutes
9. MOON PHASE
It will calculate the moon phase automatically according to the calculator, the moon phase being
divided into 8 degrees.
ENGLISH
2