General Operation; Controls; Temperature Setting And Control - L2G BBC208S Notice D'utilisation

BACK BAR COOLER
USER & INSTALLATION GUIDE

GENERAL OPERATION

The cabinet door should remain firmly closed during normal operation. This prevents warm moist air
entering end creating frost within the cabinet. If the cabinet is left open for extended periods ice will form.
This will prevent cooling and the machine will then require defrosting.
The unit should be left switched on, and should not be switched off between trading sessions. The unit is
designed to operate in an ambient temperature range of 6°C-25°C, however for short periods of time (up to
8 hours) the unit will operate normally at 32°C. The cabinet is designed to chill product in sealed containers
only i.e. bottles, cans etc. it is not recommended that glasses of drink or similar are placed in the unit for
cooling.

CONTROLS

The thermostat control is located below the doors on the front of the appliance. Refrigeration is switched on
and off at the mains supply. The light is controlled independently by using the toggle switch provided at the
front of the unit.
Warning : If the supply cord is damaged, the manufacturer, its service agent or similarly qualified person
must replace it, in order to avoid a hazard.

TEMPERATURE SETTING AND CONTROL

The front panel of the thermostat :
1
Working indicator : On – working ; Blinking – delay ; Off – stop
2
Setting indicator : On – setting status ; Blinking – defrost
2
1
2
L2G SAS 17, AVENUE DU 24 AOÛT 1944 - 69960 CORBAS
: +33(0)4 72 23 23 98 +33(0)4 72 23 23 99
www.L2Gfrance.fr