Menu 2; Digital Filter Setting During Pcm Playback; Δσ Frequency Setting During Pcm Playback; Digital Filter Setting During Dsd Playback - Esoteric N-05XD Mode D'emploi

MENU 2

Digital filter setting during PCM playback

PCMF>***
Use this to set the digital filter during PCM playback .
Set it as desired .
o By default, the setting is OFF .
OFF
The digital filter is not used during PCM playback .
FIR
The FIR digital filter features a slow roll-off without pre-echo .
RDOT
This digital filter features a slow roll-off that uses a unique analog
interpolation technique with a fluency function .
ΔΣ frequency setting during PCM
playback
PCMΔΣ>***
The ΔΣ modulator operation frequency during PCM playback can be
set to 64, 128, 256 or 512 .
Select the sound setting you prefer .
o By default, the setting is 512 .
This sets the operation of the ΔΣ modulator as a frequency multiple
of 32, 44 . 1 or 48 kHz .
Example:
When 512 is selected with a 96kHz audio source, the ΔΣ modulator
operates at 24 . 5 76 MHz (48 kHz × 512) .

Digital filter setting during DSD playback

DSDF>***
Use this to set the digital filter during DSD playback .
Set it as desired .
o By default, the setting is OFF .
OFF
The digital filter is not used during DSD playback .
ON
The digital filter is used during DSD playback .

ETHERNET port LED setting

LanLED>***
Use this to set the ETHERNET port LED . When set to OFF, the ETHERNET
port LED will not light, reducing the impact on audio quality .
o By default, the setting is OFF .
o Even when set to OFF, the LED will blink immediately after a LAN
cable is connected and while the unit is initializing after being
turned on (while "Initialize" displayed) .
OFF
The ETHERNET port LED stays unlit .
ON
Lighting and blinking of the ETHERNET port LED are enabled .
27