Settings P; Checks - Tests - AQUALUX 104274 Notice D'installation Et D'utilisation

ADJUSTING THE WATER TEMPERATURE
- Press and to adjust the temperature.
The temperature flashes.
- After five seconds, the display stops flashing.
ADJUSTING THE TIME
- Press to adjust the operating times.
- The time flashes. Press the time button
settings.
- Before the display stops flashing, press
- Press and the temperature of the water appears, after 30 seconds, the display stops flashing.
AUTOMATIC MODE
TIME ON
- Press
TIME ON
- When the display comes on and the time flashes, press
- Press and to change the settings. Before the display stops flashing, press
- Press and to change the settings.
- Once you have finished, press
- After 30 seconds, the display stops flashing.
TIME OFF
- Press
TIME OFF
- When the display comes on and the time flashes, press
- Press and to change the settings. Before the display stops flashing, press
- Press and to change the settings.
- Once you have finished, press
- After 30 seconds, the display stops flashing.
CANCELLING THE AUTOMATIC MODE
- Press and
- When the number flashes, press the button to set the time
- When the light goes off and the display shows the temperature of the water, the automatic Time On
and Time Off modes are cancelled.
- After 30 seconds, the display stops flashing.

CHECKS - TESTS

- Check the connections of the water pipes.
- Check the position of the valves.
- Check the electric connection and test the 30mA differential protective device.
- Check that the air inlet and outlet are not obstructed.
- Switch on the filter pump (or the auxiliary pump) used to deliver the required water flow in the heat
pump.
- Check for leaks.
- Set the required temperature on the thermostat.
- Use the On/Off switch to switch on the heat pump.
- The compressor starts one minute after the fan.
- Once the machine is running, check for any unusual noises.
NOTPACAQX - ind S – 0315
(can be changed when the machine is on or off)
to set the time when the heat pump starts.
TIME ON
to set the time when the heat pump stops.
TIME OFF
to cancel the Time On and Time Off modes.
(can be changed when the machine is on or off)
again to change the times, press
to set the minutes, press
TIME ON
and the temperature of the water appears.
TIME OFF
and the temperature of the water appears.
.
18/41
and to change the
and to change the settings.
again to set the hour.
to set the minutes.
again to set the hour.
to set the minutes.