EUROM HG800P Manuel D'instruction page 7

Technical specifications and diagrams
Type
Power
Capacity max.
Discharge head max.
Suction height max.
Connections
Supply voltage
Capacity of pressure
vessel
Pump housing
Weight
Installation
The unit should be installed in a covered, but well-ventilated place. This place must
remain dry under all circumstances; if necessary, provide water drainage options.
The pump on which the pressure vessel is mounted must not be connected
to the water supply. This can have consequences for the water pressure,
also for adjacent plots. In addition, the tank of the hydrophore unit is not
suitable for drinking water.
The group can further be connected to any source that provides a sufficient water
yield. See also the installation diagrams.
Failure to comply with the above conditions may result in damage to the pump and
the entire system!
HG800P
800W
53 l/m
40m
8m
1" – 1"
230V-50Hz
19 litres
plastic
12,2 kg
7
HG1200R
1200W
63 l/m
48m
8m
1" – 1"
230V-50Hz
24 litres
Stainless Steel
14,6 kg