purline PRLA5M Manuel D'utilisation page 7

DISCONNECTING POWER WHEN SERVICING
OR MOVING THE HEATER.
ALWAYS UNPLUG THE POWER CORD.
8. Always place the heater on a stable, flat, level
surface when operating, to avoid the chance of the
heater overturning. Locate the power cord so the
heater or other objects are not resting on it. Do not
run power cord under carpeting. Do not cover
power cord with throws rugs, runners, or the like.
Arrange power cord away from room traffic and
where it will not be tripped over.
9. This heater is hot when in use. To avoid burns, do
not let bare skin touch hot surfaces. Keep
combustible materials, such as furniture, pillows,
bedding, papers, clothes and curtains at least 0.9m
from the front of the heater and keep them at least
0.3m from the sides and rear.
10. It must not be used in potentially dangerous
locations such as flammable, explosive, chemical-
laden or wet atmosphere.
11. This heater is not intended for use in wet or damp
locations. Never locate a heater where it may fall
into a bathtub or other water container.
12. This heater is intended for general use only.
13. Do not use the heater outdoors.
14. Do not cover the appliance.
Location of the Appliance :
- Do not install the appliance behind a door.
- Avoid any items that might block the transmission
of heat, such as curtains, niches or radiator covers.
- Do not install the appliance right underneath a
fixed electric socket.
- The appliance's power cord must not be left on
top of the actual unit while it is in operation.
- The appliance should be located so that the plug is
completely accessible.
- Do not fit the appliance to a wall directly under an
electrical socket.
- This unit must not be covered while in operation,
there is a danger of overheating.
Note: If the power cord is damaged, it must be
changed by a qualified electrician or the
manufacturer to avoid any danger.
Installation
This appliance can be installed by two different ways:
- Fixed installation (wall mounted)
- Portable installation (optional set of wheels)
1) Portable installation :
First turn the product, you will find two holes in the
bottom that is fit for the screw for fixing the wheels.