GE TCX22 Série Manuel D'utilisation page 17

Rehanging the Doors
Rehang the Freezer Door
On models with a hinge rod, remove the hinge
a
rod from the right side with a screwdriver and
install it in the left hinge side.
Lower the bottom socket of the freezer door
b
onto the lower hinge pin on the bottom hinge
bracket.
Gently push the door under the center hinge
c
bracket and align it with the hole in the center
hinge bracket.
On models with a hinge rod, make sure the
hinge rod has been inserted into the left hinge
socket before assembling the center hinge pin.
Reinstall the hinge pin with a 5/16" hex socket
d
driver so it extends through the hole in the
center hinge bracket and into the socket on top
of the freezer door.
Hinge Rod
(on some models)
Hinge Rod
(on some models)
17