MeisterCraft MFF 860 Traduction Du Manuel D'utilisation Original page 31

5458560-Flachduebe-man 17.02.14 11:38 Seite 31
• Avoid physical contact with earthed
surfaces, for example: pipes,
heating, ovens and fridges. There is
an increased risk of electric shock if
your body is earthed or grounded.
• Keep the device away from rain or
damp. Water entering into an electrical
device will increase the risk of an
electrical shock.
• Do not misuse the cable by using it
to carry the power tool, to hang it up
or to pull the plug out of the socket.
Keep the cable away from heat, oil,
sharp edges or moving device parts.
Damaged or entangled cords increase
the risk of electric shock.
• When operating a power tool
outdoors, use only an extension cord
approved for outdoor use. The use of
a suitable extension cable for outdoor
use will reduce the risk of an electrical
shock.
• If it is not possible to avoid using the
power tool in a damp environment,
use a residual current circuit-
breaker. Use of an RCD reduces the
risk of electric shock.
Personal safety
• Be careful and ensure that you pay
attention to what you are doing, and
make sure you are using the power
tool sensibly. Do not use power tools
when you are tired or under the
influence of drugs, alcohol or
prescription drugs. A moment of
inattention while operating power tools
may result in serious personal injury.
• Use safety equipment. Always wear
goggles. Safety equipment such as
dust masks, non-skid safety shoes, hard
hats or hearing protection, according to
the type of power tool and the purpose,
will reduce personal injuries.
• Avoid switching on accidentally.
Ensure that the power tool is
switched off before you connect it to
the power supply/battery or carry it
anywhere. Carrying the device with
your finger on the switch or plugging in
a device that has its switch on invites
accidents.
• Remove any adjusting keys or
wrenches before turning the power
tool on. A wrench or a key left
attached to a rotating part of the
device may result in personal injury.
• Avoid abnormal body positions.
Ensure that you are stood securely
and keep your balance at all times.
This enables better control of the
power tool in unexpected situations.
• Wear suitable clothing. Do not wear
loose clothing or jewellery. Keep
hair, clothing and gloves well away
from moving parts. Loose clothes,
jewellery or long hair may be caught in
moving parts.
• If facilities are provided for the
connection of a dust extractor and
collection facilities, ensure these are
connected and properly used. Use of
these devices can reduce dust related
hazards.
Power tool use and care
• Do not overload the device. Use the
appropriate power tool for the task
in hand. The correct power tool will do
the job better and safer in the specified
performance range.
• Do not use the power tool if the
switch is defective. Any power tool
31