Installing The Monitor; Package Contents; Connecting The Monitor - Beetronics 27HD7M Manuel D'utilisation

Installing the monitor

Package contents

Unpack the product and check if the following contents have been included. The package content varies per item but always contains
the following:
- Monitor
- Power supply
- Remote control
- Mounting strips (metal version only)
- USB cable (touchscreen only)
WARNING! Do not use any unapproved accessories to ensure the safety and product life span. Any damages or injuries by
using unapproved accessories are not covered by the warranty.
Setup

Connecting the monitor

Before setting up the monitor, please read the supplied instruction manual and carefully follow the safety precautions. To protect
equipment, always turn off the source and monitor before connecting.
When setting up the monitor, pay close attention to your surrounding environment and ensure that the temperature and humidity
are within the specified specifications of that monitor. You will find these in the supplied manual. Once you have installed the
monitor in the desired position, please follow the steps below to connect it:
1. Connect your monitor to a power source using the included power supply. The power supply connects to the DC12V input on
the back of the monitor.
2. Connect your monitor to a video source with a video cable. This can be done with the HDMI, VGA, RCA or BNC inputs.
3. Touchscreen only: Connect the touchscreen to the source using the supplied USB 2.0 cable. Use the input labeled Touch.
4. Turn on the video source and then the monitor.
NOTICE! Our monitors accept a wide input voltage range from 9/10 to 33 volts. They are ideal for environments with
fluctuating input voltage and also offer the option of connecting the screen directly to 12V or 24V circuits.
I N S T A L L I N G T H E M O N I T O R
09 EN