geo-FENNEL FKL 55 Mode D'emploi page 24

EN
LASER SPOT CENTERING
Power on the laser and press the buttons 4 and 5 simultaneously. Now the laser dot will center automa-
tically.
During the centering procedure the display will show: * (flashes until the procedure is completed).
When the centering procedure is completed the display will show: --*-- (flashing stops).
With the buttons 4 (right) and 5 (left) the laser dot can be shifted rightwards or leftwards.
Single pressing = slow shifting in the direction selected
Continuous pressing = quick shifting in the direction selected
This feature is also available if the laser is controlled with the remote control.
When shifting the laser dot the below symbols will be displayed:
Figure 1: the laser dot is in the most left position
Figure 2: the laser dot is in left position
Figure 3: the laser dot is centered
Figure 4: the laser dot is in right positon
Figure 5: the laser dot is in the most right position
The laser dot can also be shifted with the remote control.
24