Mettler Toledo PUA579 Mode D'emploi page 5

3 Cleaning the lifting system and weighing platform
Safety instructions
WARNING
Even minor damage, corrosion or flecks of
paint on the piston rod lead to failure of the
pneumatic springs.
➜ Protect the pneumatic springs from
soiling and damage.
➜ Have soiled or damaged pneumatic
springs exchanged by METTLER TOLEDO
Service immediately.
4 Closing the lifting system
Operating instructions 22016758 07/10
Cleaning
➜ Only use disinfectants and cleaning agents in
accordance with the manufacturer's instructions!
➜ Cleaning in a wet environment:
– Water jet up to 60 °C
– Common household cleaning agents
➜ Cleaning in a corrosive environment:
– Water jet up to 60 °C
– Remove corrosive substances at regular inter-
vals
– If necessary, treat with universal oil.
WARNING
Danger of crushing!
➜ Ensure that no people are in the danger
area in front of or under the opened
weighing platform.
➜ Only operate the securing lever (1.) from
the side.
1. Release the securing lever (1.) and fold the weigh-
ing platform with lifting system carefully down-
wards (2.).
2. Move the green stop levers backwards (3.) and
completely close the swivel arms.
3. Ensure that the securing lever is locked at the back.
4. Ensure that the swivel arms are pressed on the
ground and no longer touch the weighing platform.
A weight value of 0.00 kg must be displayed for a
properly closed weighing platform.
Operating instructions
5