Sony MDR-IF130K Mode D'emploi page 5

b When connecting to your Discman's
headphones jack, connect the cord to
the transmitter's PHONES IN jack
only.
Transmitter
LINE IN
to PHONES IN jacks
Right channel
(red)
Connecting
cord
(supplied)
Unimatch
plug adaptor
(not supplied)
to a headphones
jack (stereo
phone jack)
¥
R PHONES IN L
DC IN 9V
Left channel
(white)
to a headphones
jack (stereo
mini jack)
Discman,
WALKMAN*,
TV, VCR, etc.
2
Connect the transmitter to a power
source.
Transmitter
¥
LINE IN R PHONES IN L
DC IN 9V
to DC IN 9V
jack
AC power adaptor (supplied)
Notes
•Do not connect to the PHONES IN jacks and
LINE IN jack at the same time. If you do so, the
audio signals may be mixed.
•Use only the supplied AC power adaptor. Do
not use any other AC power adaptor.
•When you connect the connecting cord directly
to an earphone jack, the audio signal will not be
output through the right channel. In such a
case, use the separately sold PC-236HG plug
adaptor.
* WALKMAN is a registered trademark of Sony
Corporation.
to an AC
outlet
Polarity of the plug
5