Troubleshooting - VESTEL EVC02-AC22 Série Manuel D'utilisation

TROUBLESHOOTING

PROBLEM
The product button LED is not lit
when it is energized.
The product does not lock the
cable in charging state.
The button LED blue and red
blinking together. (Wifi equipped
model only)
The button LED blinking red.
The button LED is steady red.
POSSIBLE REASONS
There might be power outage or
the circuit breaker can be tripped.
Be sure that cable is
connected properly.
The charger waits eco time.
Your car is in ventilation mode.
There isn't any problem.
Button LED indication only gives
information.
The AC supply voltage might not
be in the range that is specified
in the user manual or the EVC
device might have a internal
fault.
English - 11 -
SUGGESTED
SOLUTIONS
Check circuit breaker whether it
is tripped or not and be sure that
the charger is energized properly.
If the problem still continues,
please consult the service.
If you do not want to wait please
cancel eco time from
smartphone / tablet to start
charging immediately.
You may decrease the ambient
temperature of your car if it is in
an indoor environment.
Please be sure that the voltage
is in the desired range. If it is still
steady red, please consult the
service.