HAIRCUT TH33 Guide De L'utilisateur page 24

3.2 Charging the battery on the charging base
Figure 3: Charging the clipper
battery on the charging base.
1. Switch the clippers off by pressing the
On/Off button (Figure 1, D).
2. Insert the power pack connector
(Figure 3, D) in the socket (Figure 3, C)
on the charging base.
3. Insert the power pack (Figure 1, L) in
the mains power socket.
4. Put the clippers (Figure 3, A) on the
base (Figure 3, B).
5. The red indicator light (Figure 1, K)
comes on steadily during the charging
period. Indicator lights (Figure 1, G, H
and J) come on to show the battery
charge level remaining to be reached.
6. All three indicator lights (Figure 1, G,
H et J) come on steadily when the
battery charge
completed. The autonomy time is
then 150 minutes.
7. Unplug the power pack; the clippers
can be used.
24
cycle has been