Other Functions - Denon Professional DN-700CB Guide D'utilisation

Playing Audio from a Bluetooth Device
To play audio via Bluetooth:
1. If the unit is off, press the Power button to power it on.
2. Make sure that either the Bluetooth Straight Antenna or Bluetooth Remote Antenna is securely
attached to the Bluetooth Connector.
3. Select Bluetooth (BT) as the audio source (as described in
Bluetooth is selected as the audio source, DN-700CB will automatically begin searching for Bluetooth
devices.
4. Navigate to your Bluetooth device's setup screen, find "DN-700CB" and connect.
Note: If your Bluetooth device prompts for a pairing code, enter 0000.
5. Press the Play/Pause (
If you would like to disconnect from a paired Bluetooth device, press and hold the Clear button. Doing so
will also remove all Bluetooth devices from the unit's memory.

Other Functions

Panel Lock
Use the Panel Lock feature to prevent accidental changes to the unit. When Panel Lock is activated, all
buttons except for the Power button and Text/Lock button are locked/disabled on the unit (the remote
control will still function normally).
To activate or deactivate Panel Lock, press and hold the Text/Lock button for 3 seconds. When
activated, P-Lock ON and
Display, and will disappear.
Menu Settings
To access the Menu settings, press and hold the Jog Dial (or press the Menu button on the remote).
Turn the Jog Dial or use the < and > buttons on the remote to navigate through the menu. Press the Jog
Dial to select an option or press and hold the Play/Pause button on the remote. Press the Return button
on the remote to return to the previous Menu option, exit out of the menu, or wait a few seconds and the
unit will automatically exit out of the Menu settings. The Menu settings are:
•
SW Version: Displays current firmware version for microprocessor, CD, Bluetooth, and network
interface.
•
Finish Mode: Selects between Stop and Next to determine whether the Stop button returns the unit
to the beginning of the current tracklist or cues the next track.
•
Search Mode: Selects between Normal and Silent to determine whether the selected track is audible
or silent when fast-forwarding and rewinding.
•
System Reset: Resets the unit to factory default settings.
•
SW Update: Starts the process to update the unit; see
•
IP Setting: Selects static or auto IP address.
•
Dimmer Setting: Adjusts Display brightness from 1–5.
•
Volume Setting: Selects variable or fixed output volume.
•
Baud Rate: Selects 9600, 38400, or 115200 b/s; 38400 is the default.
•
Hot Start: Lists all Hot Start slots and their assigned files.
•
Network Info: Displays Web Interface link, Machine Name, IP Address, Netmask, Gateway, and DNS.
14
) button on the unit or remote to initiate playback of the selected track.
will appear in the Display. When deactivated, P-Lock OFF will appear in the
Selecting the Audio
denonpro.com to check for updates.
Source). Once