Safety Instructions; General Safety Warnings; Environmental Protection - Triton SJA200 Instructions D'utilisation Et Consignes De Sécurité

SAFETY INSTRUCTIONS

GENERAL SAFETY WARNINGS

Read and understand all instructions.
Failure to follow all instructions listed
below, may result in personal injury.
• Make sure all moving parts are free from
interference.
• Keep hands clear of all moving parts.
• Ensure Superjaws is set up on firm ground in a
stable manner.
• Be aware of overbalancing. When a large
piece is cut from one end of a job, the
remaining piece may be heavy enough to over-
balance the Superjaws. Always ensure the
workpiece is well supported.
• Check to make sure that all fixing screws and
knobs are tight and all legs are locked into
place before operating the Superjaws.
SYMBOLS

ENVIRONMENTAL PROTECTION

Do not use this product as a step or
platform.
GB
Safety Instructions / Symbols
4
SJA200 Manual_new.indd 4
• The tool must be used only for its prescribed
purpose. Any use other than those mentioned
in these instructions will be considered a case
of misuse.
• The manufacturer shall not be liable for any
damage or injury resulting from such cases of
misuse.
• The manufacturer shall not be liable for any
changes made to the tool nor for any damage
resulting from such changes.
Instruction warning.
Instruction note.
1/2/10 17:25:53