the pair stage again. Alternatively, it will exit the pair
stage automatically after 10 seconds with the memory of
previous paired speed transmitter.
SPEED transmitter illustration
Notice: The LED indication light will flash when pressed
SPEED ID CONTROL PAIR key and receiving signals.
TROUBLESHOOTING
No Display on Console
1.
Press any key to bring the console to 'Quick Start'
mode.
2.
Ensure that the batteries are installed properly in
the Console and Transmitter. If they are, install
fresh batteries.
No Heart Rate signal displayed
1.
Ensure that your chest strap is worn correctly, and
that there is moisture under the electrodes of the
chest strap.