CARE CLUB RACER Manuel D'instruction page 16

count down to zero with flashing display and Alarm
sound for 3 seconds. Then TIME will change
automatically from counting down to counting up from
00:01. The user can go into TIMER setting from SPEED
or DISTANCE Mode by press and hold 'SET' key for 3
seconds.
CLOCK Setting
Under the CLOCK MODE, Press and hold 'SET' key,
12H or 24H will flash. Press 'SET' key to switch from 12H
to 24H. Press 'MODE' key to flash the CLOCK HOUR,
then Press 'SET' key to adjust the clock hour (0 – 24).
Press 'MODE' key again to flash the CLOCK MINUTE,
the Press 'SET' key to adjust the clock minute (0 – 59).
HEART RATE TARGET ZONES
Under SPEED or DISTANCE MODE, Hold ''SET' key for
3 seconds to go into the setting, press 'MODE' key to go
to the heart rate target zones window.
Press the 'SET' key to increase maximum heart rate limit.
After setting the maximum heart rate, press the MODE
key to adjust the minimum heart rate limit.
PERSONAL DATA SETTING
Accurate personal data will make your calories burned
more accurate. Under SPEED or DISTANCE MODE,
Hold ''SET' key for 3 seconds to go into the setting,
continually press 'MODE' key to get to the personal data
windows.
4. Press the 'SET' key to select the gender, either:
Male / Female
5. Press the 'MODE' key to go to the weight unit
setting. Press the 'SET' key to select the weight,
either: Kg. / Lb. Note: this change of metric units to
imperial units will affect the displaying units:
MPH/KPH, Lb/KG and ML/KM.
6. Press the 'MODE' key, this will go to the weight
setting. Press the 'SET' key to increase the weight
by 0.5 Kg. or 0.5Lb.
HEART RATE PAIR STAGE (Exclusive in DT-3260C)
Note: All models will be paired right after produced
For commercial or maintenance reasons, the DT-3260C
has the advantage of adapting to a confined space