Cleaning And Storage; Technical Specifications; Scope Of Delivery - Dörr SL-480 Notice D'utilisation

08 | MOUNTING AND EXAMPLES FOR APPLICATION
08.1 MOUNTING ON A LIGHT STAND (LIGHT STAND OPTIONAL)
Place the ring light with the bracket (4) to a light stand with spigot and tighten the
locking screw (4a).
CAUTION
To avoid tilting of the ring light, align the ring light over a widely spread tripod
leg. Make sure that the light stand stands on an even and dry ground.
Light stands are optionally available from DÖRR.
Loosen the locking screw for the tilt function (3) and set the desired illumination
angle.
08.2 EXAMPLES FOR APPLICATION
To mount the ball head (13), the smartphone holder (14) or the mirror (15), slide the
respective fl ash shoe (13b, 14b, or 15b) in one of the universal hot shoe mounts (1)
at the ring light. Screw down the locking screws (13a, 14a or 15a).

09 | CLEANING AND STORAGE

Never use aggressive cleansing agents or benzine to clean the device. We recom-
mend a soft, slightly damp microfi ber cloth to clean the outer parts of the device.
Turn off the device and disconnect from power source or remove batteries be-
fore cleaning. Store the device in a dust-free, dry and cool place. This device is not
a toy – keep it out of reach of children. Keep away from pets.

10 | TECHNICAL SPECIFICATIONS

Number of LEDs 480
max. 1000 Lux/1 m
Light intensity
Colour temperature 3200 - 5500 K
Colour rendering index
95 R
(CRI)
Power 65 W
Outer diameter approx. 45 cm
Inner diameter approx. 30 cm
AC 100-240V ~ 50/60Hz 2,5A max.
Energy source
Alternatively: 2x Li-Ion Batteries (replace-) Sony
NP-F750/F970 (optional)
Housing Sturdy plastic housing
Weight approx. 1380 g

11 | SCOPE OF DELIVERY

1x SL-480 ring light
1x Power adapter
1x Power cable
1x Mini ball head
1x Smartphone holder with goose neck
1x Mirror
1x Bag
1x Safety hints
09
a