Rotel 161CH1-3 Mode D'emploi page 35

Grille-pain avec fenêtre transparente
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

 INSTRUCTIONS FOR USE
o
Plug into a suitable mains supply socket, then it will "toot" once to prompt that the
unit is switch on.
o
Notice: Before using the toaster for the first time, plug in, it will "toot" once, then
the unit automatic reset, after that it will "toot" once again.
Place up to two slices of bread into the centre of toasting slots (6).
Adjust the size of bread and fit for different size of bread. When this button (4)
lifts up, you can put the bread max size 20 mm for toasting. While the button at
the bottom position, the bread minimum size will be 10mm.
Turn the variable browning control dial (3) to required setting (Min=lightest,
Max=darkest).
Press the button (2), the lamp of this button (8) will light; heating element and
synchronous motor will work. The bread will be down and up automatically.
Once finished, the toaster stops working, and the lamp (H) also extinguishes, it
also will "toot".
If the toaster is working, press the button (2), the appliance will stop, and the
lamp (8) also extinguishes. Press it again, the appliance will automatic reset,
after that it will "toot" once and waiting for next working.
 USING THE ON/OFF BUTTON
o
There are two functions of this button. First, at standby mode, press the ON/OFF
button, the lamp of this button will light, heating element and synchronous motor
will work. When the micro-switch shut off automatically, the toaster stops working,
and the lamp also extinguishes. Second, this button is also the reset button of the
lifting shelf that means when you start the toaster again, you can press this button
to lower the lifting shelf.
 USING THE STOP BUTTON
o
While the toaster is working, you can press this button to stop the toaster. The lamp
(7) of this button will light. At that time, the lamp of the ON/OFF button
extinguishes, the heating element also stop working. But the breads will be lifted up
and down automatically until the whole working is finished.
 USING THE POWER CONTROL KNOB
o
It can control the power of the heating element: power range: 420W-750W. If you
turn clockwise, the power will be increased, while counterclockwise, the power will
Gebrauchsanweisung ○ Mode d'emploi ○ Istruzioni per l'uso ○ Instruction for use

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

U161ch1U161ch2U161ch3

Table des Matières