Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Parameters:
Wireless Noise Cancelling Earbuds S3
Wireless charging and wired charging are both workable.
Load impedance
Frequency range
Battery life
Maximum noise deduction
Water proof level
Bluetooth version
Sensitivity
Bluetooth Support
Charging Time (Charging Box)
Operating voltage
Battery capacity
Weight
* Above data are all from the laboratory and for reference only.
*The charging time of charging box will be prolonged if charging box is not in middle of
wireless charging base.Because wireless charging base transmits power in the form of coils..
Enter Pairing Mode:
Before Pairing:
1. Taking out the earbuds from charging case
2. Wait 10 seconds to let earbuds pair with itself automatically.One earbud will flash light and
the other will not if paired successfully.
32Ω
2.402G-2.480G
1000 times
>-26dB
IPX5
V5.1
- 94 dBm
AAC,SBC,A2DP,HFP,HSP,AVRCP,etc.
1-2 Hours (Wired Charging)
Earphone 3.7V
Earphone 45mAH
Charging box 400Mah
5.5g for single earphone
Start Pairing:
Open the "Bluetooth" function on your phone,search for
"S3"
and click it to connect.The pairing is successful
when the blue and white LED indicator lights are off.
Automatic Pairing:
Normally your earbuds will automatically pairing with
your mobile next time once ever paired successful-
ly.Sometimes perhaps still need you to click the Blue-
tooth pairing name "S3" on your mobile.
*After taking out earbuds from the charging box,if it is
not used about five minutes,earbuds will automatically
shut down to save power.Touch and hold the touchpad
of earbuds for 2-3 seconds to turn earbuds on.
*If connect with other devices,please firstly disconnect
or cancel the pairing in the Bluetooth control panel on
your phone,your S3 will enter standby state after dis-
connecting.
3-5 Hours (Wireless Charging)
48g for charging box
English
2
Publicité
Table des Matières
