Automatic Operation - THOMSON TRMC50.4X Mode D'emploi

OPERATION
Semi–automatic operation
If the oven is to be switched off at a given
time, then you should:
Set the oven function knob and the tem-
perature regulator knob to the setting at which
you want the oven to operate.
Press button until the display will show:
OK
80
Set the required time using buttons < / >,
within a range from 1 minute to 10 hours.
The set time will be introduced to the memory
after approx. 7 seconds and the display will
show function.
AUTO
When the set time has passed the oven is
switched off automatically, the alarm signal
is activated and the signal function
flashing again;
Set the oven function knob and the tem-
perature regulator knob to the switched–off
position.
Press button , < / > in order to switch off
OK
the signal; the signal function will go out and
the display will show the current time.
80
OK
AUTO

Automatic operation

If the oven is to be switched on for a specified
period of time and switched off at a fixed hour
then you should set the operation time and
the operation end time:
Press button
OK
80
Set the required time using the buttons < /
> within a range from 1 minute to 10 hours.
Press button
OK
88
Set the switch–off time (operation end
time) using button < / >, which is limited to a
period of 23 hours and 59 minutes from the
current time.
Set the oven function knob and the tem-
perature regulator knob to the setting at which
you want the oven to operate.
20
until the display will show:
80
OK
until the display will show:
80
OK